BM Industrial MS Polymer Silicone Sealant
Features &Benefits
1. Paint able
2. Sealing most materials
3. Excellent adhesion
Colors
White, black, grey
Cure Time
As exposed to air, SV900begins to cure inward from surface. Its tack free time is about 50 minutes; the full and optimal adhesion depends on the sealant depth.
Applications
1. construction of housing and other areas of bonding and sealing
2. fixed panel, frame, window sill installation, suitable for a variety of building materials such as paint metal, glass, wood, concrete, stone, masonry and other ordinary seal
3. seam and ceiling seal
4. water pipes,roof gutter and other seals
5. activity room, container seal
6. interior decoration seal
7. mildew-suitable for kitchen and toilet applications
8. the floor system of bonding, especially for housing renovation when the laying of tiles
9. on the porous material or smooth, moist surface has a strong adhesive force
Usable Life and Storage
SV900 should be stored at orbelow 27℃ in original unopened containers. It has a shelf life of 12 months from the date of manufacture.
Technical data
| Test standard | Test project | Unit | value |
| Before curing——25℃ , 50% R.H. | |||
| GB13477 | density | g/m3 | 1.40±0.05 |
| GB2793 | Non-volatile components | % | 99.5 |
| GB13477 | Flow, sagging or vertical flow | mm | 0 |
| GB13477 | surface drying time（25℃ , 50% R.H.） | min | 30 |
| Curing speed | mm/24h | 3 | |
| Sealant curing speed and operating time will have different with different temperatures | |||
| and temperature, high temperature and high humidity can make sealant curing speed | |||
|
faster, rather low temperature and low humidity are slower.
14days after curing——25℃ , 50%R.H. |
|||
| GB13477 | Durometer Hardness | Shore A | 32-38 |
| GB13477 | The ultimate tensile strength | Mpa | 2.5 |
| GB13477 | elongation at break | % | 400 |
Instructions
- Surfaces and materials should be clean and free of dust and grease. When used as adhesive: apply in beads or dots onto the material which needs to be bonded, press the material strongly onto the substrate and leave to set. When used as sealant: apply in a regular bead and smoothen immediately with Soudal Joint Finish or a soapy solution. Optimal application temperature +5°C until +25°C. Final strength will be achieved 24 hours after application.
Write your message here and send it to us
