WACKER® SN – SANITARY NEUTRAL
Features &Benefits
1. long shelf life
2. non-sag
3. readily gunnable both at low (+5 °C) and high (+40 °C) temperatures
4. good tooling properties
5. mildew resist
6. excellent high elongation
7. excellent weatherability
8. excellent durability
Technical data
| Property | Condition | Value | Method |
| Density | - | 1.01 g/cm³ | ISO 1183-1 A |
| Extrusion rate - volume flow | - | 480 ml/min | internal method |
| Skin formation time⁽¹⁾ | - | 9 min | internal method |
| These figures are only intended as a guide and should not be used in preparing specifications. | |||
| Modulus at 100 % elongation | - | 0.34 N/mm² | ISO 8339-A |
| Consistency - | - | Non-sag | ISO 7390, profile U 20 |
| Elongation at break | - | 300% | ISO 8339-A |
| Hardness Shore A - | - | 22 | ISO 868 |
| Tensile strength | - | 0.7 N/mm² | ISO 8339-A |
Applications
1. Sealing of connecting and expansion joints in the building industry
2. Sealing of joints between in sanitary applications
3. perimeter sealing
How to Use
The substrate areas that will be in contact with the sealant must be clean, dry and free of all loose material, dust, dirt, rust, oil and other contaminants. Non-porous substrates should be cleaned with a solvent and a clean, lint-free, cotton cloth. Wipe dry immediately with another such cloth before the solvent evaporates from the surface.
Usable Life and Storage
The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Limitations
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
